Availability: | |
---|---|
Quantity: | |
LT30
Overview
LT30 multifunctional portable power bank is a power supply device with AC 110V/220V single-phase output and multi-voltage DC output. It uses lithium iron phosphate battery as the main energy storage. Our products have many advantages, not least of which is that they are very safe and have a large capacity. Besides,it has a small size and light weight but high power. At the same time, the product is easy to carry and other characteristics. The product has a telescopic rod, which is flexible. There are also shock-absorbing belts that allow people to walk effortlessly. Because the strong pull rod is easy to hold, the design of the small car box makes the movement easy to use without tiring hands.
The LT30 features a lithium iron phosphate battery, 3000W portable AC/DC power supply, and TI power management chip/built-in fire extinguishing device. Its main core technologies are: high and low voltage protection, installation free, intelligent fan, shock-proof design, power display, overload protection, high temperature protection.
Product parameters:
Battery type: Lithium iron phosphate battery | AC output current: 15A MAX | AC output voltage: 220V±5% | Frequency:50±0.5Hz |
Output power: 3000W | Peak power: 6000W | DC output voltage: 12V/24V/48V | DC output current:10A(MAX)/12A(MAX)/50A(MAX) |
USB/TYPE-C:18W(MAX) | Charging parameters: 54V/12A | Battery capacity: 62.5AH | Charging time: 6~7H |
Cycle life:>2500 times, remaining capacity 80% (5%-95%DOD) | Appearance size: 610*440*250(mm) | Weight:~45Kg |
Instructions for use:
1.Communication use:Turn on the AC switch AC/ON/OFF and the power indicator will light up. The power supply will make a "beep" sound. Then the fan will rotate for 1 second and stop. The AC output is normal AC/OUT and can be used with a load! |
2.DC use: turn on the DC switch DC/ON/OFF, and the power indicator will light up. Turn on the DC output to DC/48V/25A, 24V/12A, 12V/10A, which can be used at the same time. Pay attention to select the correct output voltage to avoid damaging electrical appliances. You need to turn on the switch of the USB/TYPE-C output port separately when using USB or TYPE-C. |
3.Charging use:Connect the power adapter to the mains and the power indicator will light up. Then connect the adapter connector to the charging port of the power supply. The power supply has built-in charge management. After the connection is complete, the battery level will show on the display that it is being charged. When the power supply is fully charged, the battery level display will automatically turn off. This means that the power supply is fully charged, please remove the power adapter. |
Notes:
Note1: 12V cigarette lighters cannot be used to heat cigarette butts! It can only power electronic products.
Note2: Do not use a load that exceeds the rated power of this power supply. The over-power power supply will automatically cut off the output. When the power of the power supply is as low as 20%, please save important data in advance. Be prepared to replace the power supply, and charge the power supply in time.