 |
| Quantity: | |
|---|---|
A.7B
：The 12V/6ah (LiFePO4) battery is durable and meets the standard. It lasts longer on a single charge and avoids frequent charging. The battery can start instantly, improving the motor's utilization of current and increasing torque and power output.
Main features：
1 SOC display - by pressing the multi-function button (below abbreviated as button), SOC is displayed in different color, the SOC value is calculated by Coulomb meter. |
| 2.In the case the battery is over-discharged (for example you left your lights on for long period of time), the battery will put itself into sleep mode and reserves enough energy for next operation. While the battery is in sleep mode, press and hold the button for 2S will wake it up and provide output for 1 minute, the LED display embedded with the button indicates 1 minute countdown (refer chapter 8 for detail). |
3. Patented function - Energy-Release Technology, during the vehicle is operating, it will charge the battery, and when the battery is over-charged, it will frequently cause fault code or flashing light on the vehicle dashboard, with the Energy-Release Technology, we can eliminate these kinds of problems. |
| 4. The built-in Battery Management System features over-discharge protection, cell balancing and temperature protections, makes the battery safer and longer lasting. |
| 5. Two solid copper thread insert type terminals per negative and positive which enables easy wire connections. |
6. Color coded silicon terminal sleeves protect against short circuits |
Battery Type：Lithium Iron-Phosphate (LiFePO4) | Built-In Battery Management System：YES |
Voltage：12.8V (nominal) | Capacity：6000mAh |
Dimensions：150*65*93mm | Weight：1.1kg |
Cranking Amps：650 peak (varies, see battery label) | Max Charging Rate：(see battery label) |
Max Charging Voltage：14.4V | Min Discharge Voltage：12.4V |
Peak Discharge Current：180A (20S) | Charger Type：Lithium-Iron Phosphate for 12.8V Batteries |
Warnings and Precautions：
To prevent fire, personal injuries, and property damages, check out the following safety guidelines before using this battery (the product)
1.DO NOT attempt to use the battery around areas where flammable particles or high dust content is presented, in this case the potential of explosion is raised. |
2.DO NOT attempt to jump-start this battery while its voltage is below 10V. |
3.DO NOT attempt to connect this battery with other batteries with different battery chemistries such as lead acid. |
4.DO NOT attempt to charge this battery with a lead acid battery charger, use only approved lithium-ion chargers. |
Make sure the product is installed correctly, position the cable leads properly to avoid accidental damage by moving vehicle parts (for example hoods and metal parts) and moving engine parts (for example fan blades, belts, and pulleys), do not install the product next to metal objects that could cause a short-circuit.
1.This product is designed to work in ambient temperatures between -10°C to 48°C (14°F to 118°F). |
2.Only charge the battery within 0°C to 45°C (32°F to 113°F) range. |
3.The storage temperature is -20°C to 25°C (-4°F to 77°F). |
4.Never exceeds 80°C (176°F) under any operating/storage conditions. |
| 5.DO NOT attempt to charge or jump-start a damaged or frozen battery. |
